PRODUCTS

General Laboratory Equipment

Cartridges


1Ultra_High_Capacity_Moisture_Filter

Ultra-High Capacity Moisture Filter

Moisture in carrier gas lines will prematurely degrade oxygen and hydrocarbon traps and increase detector noise. As a precaution, we highly recommend installing a moisture trap before the hydrocarbon and oxygen traps on all carrier gas lines.

 

 

 

 


 

2Ultra_High_Capacity_Oxygen_Filter

Ultra-High Capacity Oxygen Filter

Oxygen is a column killer. It is present even in UHP gases, as minute leaks at fittings allow oxygen to influx against the concentration gradient. Because oxygen can enter a gas line at any fitting or during gas bottle exchange, the oxygen trap should be the last connection before the gas line enters the chromatograph.

 

 





3Ultra_High_Capacity_Hydrocarbon_Filter

Ultra-High Capacity Hydrocarbon Filter

Use a hydrocarbon trap if your gas has a potential source of hydrocarbon contaminants or if you suspect you are observing carrier gas ghost peaks. Install the hydrocarbon trap after the moisture trap, to prevent moisture from degrading the hydrocarbon-trapping ability of the activated carbon in the hydrocarbon trap.

 

 

 



4Ultra_High_Capacity_Indicating_Hydrocarbon_Filter

Ultra-High Capacity Indicating Hydrocarbon Filter

The hydrocarbon trap is also available with AT indicator.

 

 

 

 

 


 

5High_Capacity_Combi_Filter

High Capacity Combi Filter

The Fuel Gas Filter is perfect for purifying flame ionization detector (FID) fuel gases, removing both moisture and hydrocarbons. Using the Fuel Gas Filter for FID Hydrogen and air will produce a stable baseline, improving overall reproducability and sensitivity. Ideal for use in combination with a zero air generator.

 

 



 



6High_Capacity_Triple_Filter

High Capacity Triple Filter

The Triple trap is ideal for purifying carrier gas. It contains oxygen, moisture and hydrocarbon scrubbers in one easy to change economical cartridge .

 

 

 

 

 



7High_Capacity_Triple_Filter_with_AT_Indicator

High Capacity Triple Filter with AT Indicator

The Triple trap is also available with AT indicator for Hydrocarbon.

 

 

 




 



8High_Capacity_Triple_Filter_Helium_Specific

High Capacity Triple Filter Helium Specific

The Helium-Specific Triple trap is ideal for purifying helium in GC/MS systems. This trap is packed and purged under helium and contains oxygen, moisture and hydrocarbon scrubbers in one cartridge.

 

 

 

 



9High_Capacity_Triple_Filter_Hydrogen_Specific

High Capacity Triple Filter Hydrogen Specific

The Hydrogen-Specific Triple trap is ideal for purifying hydrogen in GC/MS systems. This trap is packed and purged under hydrogen and contains oxygen, moisture and hydrocarbon scrubbers in one cartridge.